When putting up drywall, accuracy is very important, and if you use the best auto feed drywall screw gun, you can keep the accuracy of driving fasteners securely and effectively. When installing drywall, you have to drive the fastener in at the same exact depth every time. An auto feed screw gun can make the job easier by letting you feed the screw in the best way.
A screw gun is a useful tool that makes it easy to fasten the drywall on the ceiling, even in a small space. But none of the screw guns on the market have a longer-running depth-adjustment trigger. Without basic knowledge, it can be hard to choose the most useful and comfortable screw gun.
Table of Contents
Best Auto Feed Drywall Screw Gun
We’ve listed some of the best screw guns that can be used in a lot of different ways, are safer and easier to use, and will work well for a long time. We also talked about some other useful information, such as how to use a screw gun, the pros and cons of using nails or screws for drywall, and a buying guide to help you get the right tool for a certain job.
6. DEWALT 20V: Auto Feed Cordless Drywall Screw Gun
- This best collated screw gun has a brushless 20-volt motor that lets it run faster and for longer.
- This cordless screw gun has a nose cone that can be locked in three different positions so that it always works at the right depth.
- The DCF6201 Collated Magazine Attachment can help you get more done with this screw gun.
- This drywall screw gun is well-balanced, and it has an LED light to help you work in dark places.
Even though it is made by Dewalt, this drywall screw gun is a best-seller on its own because it is well-made and does a great job. This cordless screwdriver is just as balanced and easy to use as many of its corded counterparts. It has a brushless motor.
With this drywall screw gun, the operator will have the longest run time and the fastest speed, up to 4,400 RPM, to install the drywall properly and securely. This screw gun is made of plastic and metal. It is very light and can be used for a long time while working overhead. It has LED lights that light up dark work areas.
What we like
- It is the most popular drywall screw gun on the market. It has a strong motor and works well. The screw gun is easy to carry and has a depth adjustment so that drywall can be put up accurately. A 3-year warranty is also included.
What we didn’t like
- The direction-changing lever is always in the wrong place. This can be fixed by changing the depth. There is no battery included.
5. Makita 18V: Best Collated Drywall Screw Gun
- This cordless screw gun has a lock mode that means it won’t start until the fastener is engaged. This makes it safer and quieter to use.
- It’s the best auto-feed screw gun because it has 3 levels of LED lights that both light up the work area and show how full the battery is.
- This auto feed screw gun will last a long time because it has a BL motor and is made of all metal for the gears and housing.
- The screw gun has a nose piece that can be changed so that the screw depth is always the same. This is important for installing drywall correctly.
This Makita Cordless Drywall Screw gun is one of the best auto-feed drywall screw guns because it works well and keeps you as safe as possible. Even though it has a lower voltage brushless motor than the last model, this screwdriver can reach speeds of up to 4000 RPM, which is a lot faster. With this Makita drywall screw gun, you can easily take care of a wide range of drywall and framing tasks.
Aside from these, this cordless screw gun has a 3-stage LED gauge, all-metal gears and housing, push drive technology, a lightweight design, and many other features that make it easier and safer to use.
What we like
- It is a strong and long-lasting screw gun that can be used to put up drywall and do other framing work. The screw gun is made of metal, and has a brushless motor, a depth-adjustable nose, a multi-use LED light, and a brushless motor. It is also easy to use because it is lightweight.
What we didn’t like
- It doesn’t have a warranty and the clutch doesn’t engage quickly.
4. Milwaukee M12: Best Cordless Screwdriver Kit
- With a variable-speed trigger and 15+1 clutch settings, the operator has the most control over fastening and won’t overtighten screws.
- It is small and light, so you can use it in tight spaces on the job site. It can also handle tough drywall jobs.
- It was made with an LED light and a fuel gauge so that you could work without stopping.
- Designed with a quick-change chuck that doesn’t need a key.
Whether you are right- or left-handed, this Milwaukee M12 Hex Cordless Screwdriver gun will help you do precise fastening jobs every time. This drywall screw gun, in particular, has two belt-clip positions so that both right-handed and left-handed people can use it with precision. The feature also makes it possible to change bits with one hand, which is the most efficient way to work.
The maker of this best collated drywall screw gun made it so that it has the best precision, portability, and power on the market. So, it has a trigger with a variable speed, 15+1 clutch settings, and a lightweight design. With the built-in LED light, ergonomic grip, and one-year warranty, this user will be happy with how long it lasts and how well it installs drywall.
What we like
- The auto feed drywall screw gun is made to work well for a long time and can do a lot of different things. It is very easy to use and adjust, with a trigger that lets you change the speed and a variety of chuck settings for the most precise drywall work. The screw gun is also very light, and it comes with a 5-year warranty.
What we didn’t like
- It doesn’t have a higher RPM and has a 12v motor, which means it can’t be used for heavy-duty drywall and framing jobs.
3. SKIL: Best Collated Screw Gun
- Design with Circuit Sensor Technology finds the live wire so that fastening and drywall installation can be done in the safest and most confident way.
- It has a simple bit lock and comes with 9 different bits, so you can choose the right one and lock it for the best and most consistent results.
- The drywall screw gun has two LED lights that make it easier to see in small places.
- The screw gun has a rechargeable lithium-ion battery and can be charged with a micro USB cable. This gives it a longer run time and makes it easier to charge.
You can try this SKIL Rechargeable 4V Cordless Screwdriver if you want to put up drywall and want the safest and most useful screw gun. To keep the electrical outlet, fixture, and switch as safe as possible, this screw gun is best for small projects and everyday use at home.
This drywall screw gun is small and has a special feature called “circuit sensor technology.” So, a beginner or someone who only does it occasionally can find the electric life wire and outlet before they cause an accident and safely finish the fastening task. This drywall screw gun can do more than one thing, and it comes with a lot of extra parts to make it easy to do any fastening job.
What we like
- It’s a high-end sacred gun that can be used safely and accurately for light-duty jobs. The drywall screw gun is small, light, and easy to use. It comes with a lot of different attachments, an LED light, and a 5-year warranty.
What we didn’t like
- The screw gun doesn’t have speeds that can be changed or torque settings. So there is a chance that the fastener will be too tight.
2. WORX: Best Auto Feed Screw Gun
- The auto feed drywall screw gun comes with a 4v MaxLithium battery that can hold a charge for months, so it’s always ready to use.
- It has a clever screw holder that keeps the screw in place so you can put up drywall with just one hand and no problems.
- The screw gun has a Rapid Reloadable Cartridge that holds the bits safely so that you don’t feel like you’re digging around in your pocket.
- The drywall screwdriver comes with six different bits so that you can use it to fasten things in as many different ways as you want.
This WORX WX255L SD Semi-Automatic Power Screw Driver will improve the way you use a screw gun. Especially, it’s a semi-automatic driver with a clever screw holder that makes it easy to drive and remove screws without dropping them, even when working upside down.
The drywall screw gun also works with 6 bits and makes it easy to switch them out for a variety of uses, such as putting up drywall. Even though it’s very small and light, the screw gun has an internal battery and charger that makes it easy to get back to work.
What we like
- It is very light and easy to use, and the battery and charger are built right into the screw gun. The screw gun also comes with 6 bits and a bit holder so that it can be used precisely and is sold for less money.
What we didn’t like
- The screw gun isn’t good for tight spaces, and it doesn’t look like it will last long.
1. DEWALT DW255: Drywall Screw Gun
- The screw gun has a rubber grip and a trigger that you can pull with two fingers. This makes it easy to control the application and get it right.
- It has a high-speed motor that turns at 5,300 RPM so that drywall can be put up quickly.
- The drywall screw gun is made of helical-cut steel, which will make it last longer.
- The auto-feed screw gun has a depth-sensitive nose piece that drives the fastener at the same depth every time.
Want a powerful, heavy-duty screw gun that can handle any tough job, like putting up drywall? Try this DEWALT Drywall Screw Gun that is plugged in. This drywall screw gun is made with a high-speed motor that can turn at 5,300 RPM to hang drywall quickly and do other tougher fastening jobs.
More importantly, the heat-treated steel gears and helical-cut steel construction of this corded screw gun make it a durable addition to the toolbox of any professional or occasional DIYer. Even though it’s a light screw gun, the trigger has an ergonomic rubber grip to make it as comfortable and easy to use as possible.
What we like
- It is a strong, heavy-duty, corded screw gun that can be used to hang drywall quickly and easily. The screw gun is made of steel and has a rubber trigger grip that makes it easy and accurate to use. This screw gun comes with a one-year warranty from the company that made it.
What we didn’t like
- The screw bit isn’t very useful because it can be pulled out easily and can’t be used for many things.
How to Choose the Best Automatic Drywall Screw Gun
Check these things about the auto-feed drywall you want to buy to make sure it will work the way you want it to:
Length of Screw
When you have to work on drywall, the length of the screws is very important. Many do-it-yourselfers use 1/2-inch screws, but you can also use 1/4-inch and 5/8-inch screws. 5/8 inches is the thickest, which makes it the best choice for garage walls.
Threads on screws
Based on the job, you can choose between coarse-thread and fine-thread screws. The coarse thread is wide and good for holding on to. But it tends to get stuck in your hand. During the operation, it’s best to wear gloves.
On the other hand, fine-thread works well on metal studs because it cuts slowly through metal to get a good grip.
Corded vs. cordless
Corded drywall screw guns are the best because they run longer and are more powerful. But they aren’t easy to carry around. If you can choose between 110v and 240v, a 240v corded screw gun is the best choice.
On the other hand, cordless screw guns are easier to move around, weigh less, and need an extra battery to run for a longer time.
Choose an auto-feed drywall screw gun that weighs between 3 and 7 pounds to work for a long time without getting tired. It’s also easy to work on things that are up high.
Speed and Braking
The drywall project will be better if the clutch is adjustable and the speed can be changed. By using a screw gun with these features, you will be able to control it better depending on the surface you are working on and your needs.
The drywall screw gun should have a collar that can be moved to set the screwing depth. Using this function, you can make sure that screw guns are always fired at the right depth and keep the quality of the job.
Depending on how much money you have, you can add a useful extra to your auto feed drywall screw gun to make the job easier. LED lights and belt hooks can be helpful if you need to work in a dark or small space, or if you want to carry the tool without using your hands.
How does a Screw Gun for Drywall work?
With a button near the nose, a drywall screw gun can drive the screw to a depth that has already been set. Before firing the screw at the desired depth, it must also set the screw at the head section and engage the clutch.
With the screw set still in place, you can use the collated magazine to feed another screw into the head section automatically or almost automatically. Even though guns have different screws, some sizes of screws work with them. So, if you are a beginner, you need to choose the right screw gun with the right size screws for installing drywall securely and correctly without doing any damage.
How to use a screw gun for dry wall?
A drywall screw gun is a useful tool for fitting and putting up drywall on the inside of a building. Putting up drywall is a finishing job that can be done faster with a screw gun. The drywall screw gun is a simple tool that works pretty much the same way as a regular screw gun. Still, you need to know how to use the screw gun in order to make the job safer and more accurate.
How to Choose a Screw Gun
Choose the best drywall screw gun to make the job easier and more convenient. If it’s a cordless drywall screw gun, make sure the battery is fully charged so it can run as long as possible.
If you have an automatic screw gun, you can store all the screws you need at once, but if you have a manual screw gun, you have to fix each screw one at a time. Automatic models cost a bit more, but they are still useful and easier to use. It can also be used with a drywall screw gun that uses screws that come in a coil and can be easily loaded through the gun.
Putting up Drywall
Place the screw gun in the right spot and press the trigger against the drywall to make sure the screw is in the right place and at the right depth. Repeat the steps until the sheet of drywall is firmly attached to the wall.
Most drywall screw guns have this feature, which lets the user drive the screw a little deeper if they need to. By doing this, the screw is almost impossible to see, even if it doesn’t go all the way through the wall. It might seem easy to use a screw gun, but it takes a lot of practice to get good at it. Even though adjusting the depth takes extra time at first, it’s worth it for the quality of the drywall project to be patient.
Drywall nails or screws? Which one is best for drywall?
Most fasteners used in do-it-yourself projects are screws and nails from a nail gun. But because of the project, you have to use one of them, so choose the best one. But among pros, the choice is almost always clear for different materials and uses.
There is enough confusion about how to put up drywall that needs to be cleared up. So, in the next section, we’ll compare the two drywall screw gun fasteners on a number of different points to help you choose the better one.
Even when you compare brands, coatings, and lengths, drywall nails are almost always much cheaper. But you will need more sheets than you thought to put up the drywall. On the other hand, drywall screws are worth it when you think about the cost and quality of the project as a whole.
In the past, a seasonal drywall contractor was good with hammers and nails and could use them quickly. But right now, it’s almost impossible to change an installer with a steady hand and a screw gun with a magnetic tip. If you know how to do the basics, drywall screws will make the job go faster.
You can multiply it to figure out how strong it is. pound for pound, nails can be stronger than screws of the same length. But grip strength is more important when it comes to putting up drywall. Nails are more flexible and can hold up well against shear force, but screws have great grip and tensile strength to keep drywall from pulling away from the studs. Even when holding power is taken into account, screws can’t be beat. Still, if you want to use drywall nails, the ring shank nails will hold better.
Both nails and screws are dangerous for people who own homes. Too much humidity and sudden earthquakes can cause the impact to get out of hand. But if you take the right steps, you can stop it from happening.
In this case, the screws are much better than nails because they don’t move around as much. So, safety can be made sure by using the right length and number of screws per sheet.
Which fastener is better?
Using screws to put up drywall is without a doubt the best way to do it. These hold better, allow you to drive faster, and tend to pop after a while. Because of this, many contractors use screws to put up drywall.
What a Drywall Screw Gun Can Do for You
Here are some of the best reasons to use drywall screw guns for another project:
Easier installation: It makes installing interior drywall faster and easier by driving the gun faster than most screwdrivers do. Drywall screw guns also save a lot of time and effort, which is why DIYers like to use them.
When you use a drywall screw gun to fix or remove screws from the wall, you don’t have to twist your wrist. This mechanical tool can be run by a battery or by electricity. The drill head automatically drives the screw when the drill head turns. So, it makes it less likely that your wrist will get hurt or tired during the action.
Driving at the desired depth: The Drywall screw gun lets you set the depth and adjust how much force is needed to drive the screws through the drywall. This makes sure that the gun works accurately and continuously. When the screw is driven to the right depth, it leaves a small hole in the drywall for a natural, smooth look.
Store the screw: A drywall screw gun has a place to store the screws that are needed for the job. So, the operator won’t have to put the screws back in as they move across the length or width of the drywall installation.
Drywall screw guns are worth the money because they are made of high-quality materials and are made to last a long time. The tools also need little repair and maintenance.
Questions about the Best Auto Feed Drywall Screw Gun
What is the best screw gun brand?
Dewalt makes the best screw guns because they are faster, stronger, and more comfortable to use, both at work and at home. Dewalt also has a great warranty and great customer service, which makes them a reliable brand among contractors and other DIY fans.
What is an automatic screw gun?
It’s a screw gun that’s made to automatically feed collated screws, which makes driving them easier and faster. This auto-feed screw gun works best for tasks that you have to do over and over again, like building a house.
Which screw gun works best for drywall?
The best screw gun for drywall is the DEWALT 20V MAX XR Cordless Drywall Screw Gun. This screw gun has everything you need to put up drywall correctly. It has a brushless motor with a higher RPM, a nose cone lock, an LED light, and a balanced, ergonomic design.
Is a screw gun similar to a drill?
Even though screw guns look like drills, their main purpose is to shoot screws. Even though the gun has a screw, it has a nose, while the power drill has a chuck. The tip, which is also called a shank bit, fits into the screw gun’s nose.
How is a Senco auto feed screw gun used?
The Senco auto feed screw gun can do a lot of different things and is very easy to use. It feeds collated screws automatically. Plus, you can use this screw gun with one hand without dropping screws, which will help you get more done.
Take the best screw gun for dry wall
The first reason a screw gun was made was to drive screws. But thanks to the wonders of modern technology, brands have started making home appliances that are made just for certain tasks. The products we talked about above are some of the best auto feed drywall screw guns that are made for drywall and framing.
These are strong, safe, and can be used for more than one thing. They can be used to install drywall accurately and safely. Lastly, whichever one you choose, you’ll get free shipping, good customer service, and more work done.