Skip to content

Can I use Impact Bits in a Regular Drill?

  • by

DIYers frequently develop a curiosity for different drills and drill bits. Regular drill bits and impact bits are excellent examples of this. Consider whether you can use impact bits in a conventional drill before beginning the drilling operation. Will the combination be secure or cause significant issues? If you have a vague concept, let’s use the article to get the remainder of the details.

Today, we briefly reviewed the potential effects of using an impact bit versus a standard bit. The consequences of utilizing a standard bit in an impact driver were addressed in the handbook itself. So, after reading the advice, you won’t have any trouble making the best choice for your safety and increased productivity.


Can you use Impact Bits in Regular Drills?

Using impact bits in a normal drill is generally safe. The explanation is that an impacted bit is built to resist more torque. There won’t be any challenges that come with a typical drill. However, because most impact drills come with a hex-headed shaft, check sure the chuck of your standard bit can accommodate the impact drill. To start, let’s examine the distinctions between an impact bit and a standard drill bit.

Regular drill bits vs. impact driver bits

Torque is the primary factor that distinguishes an impact driver from a conventional drill. In comparison to a conventional drill, impact drivers often create more power to tighten the screws. As a result, various types of bits are required for usage with both power tools. In comparison to a regular drill bit, the impact driver uses more ductile material.

Concerned with ductility? Metal can regularly change its shape due to this property. The impact driver’s bit revolves at maximum speed and generates a lot of pressure when fastening screws, but the device is designed to handle the circumstance.

In contrast, the ordinary bit will shatter quickly due to its weaker ductility if it encounters this condition instead of an impact driver bit. The impact driver bit can twist readily without creaking due to the improved ductility, making it the perfect choice for certain jobs.

An impact drill bit’s narrow shaft

The shaft of the impact driver bit is thinner than the shaft of the standard bit when the two types are positioned side by side. This impact driver bit’s narrow design allows it to quickly release excess stress from the bit’s tip through the shaft. The impact driver’s shaft surface is also significantly larger, which greatly aids in stress dissipation. When these properties are combined, an impact driver bit has more torsional force than a normal drill bit.

Torsional strength also prevents the impact driver bit from cracking when the bit is subjected to extremely high pressure. In contrast, a normal drill bit has a thicker shaft that, because it has less torsional force, cannot transfer the stress from the bit’s tip. Therefore, if used on solid materials, it increases the likelihood of shattering the usual drill bit.

Various ending point

The final portion of the impact driver bits and conventional bits is another significant distinction. Regular bits typically have rounded heads, which makes it impossible to attach them to the impact driver because this instrument only accepts hex ends. However, certain common bits have hex ends, making them compatible with impact drivers. Is that to say that I can use standard bits in an impact drill? No, still.

Because of the enormous stress that the impact driver exerts, a standard bit cannot be used. Therefore, if you use a standard bit with a hex-ended end in an impact driver, the bit will break easily, harming both the bit and the power tool. As a result, producers create a unique kind of bit known as an impact driver bit that has a hexagonal end. As a result, it can endure high pressure while also fitting in the impact driver’s hexagonal shanks.

Are Impact Driver Bits Compatible with Regular Drills?

DIYers frequently struggle to select the proper type of drill bit for particular power equipment due to the huge variety of drill bits available. However, if you’re wondering whether you can use an impact driver bit in a standard drill or not, the answer is yes. The combination itself will be rather secure. Let me just go through this: A chuck of a standard drill is used to clamp various bit types. The standard drill can use both hex and rounded-ended bits because of the chuck. The regular drill will perfectly accommodate the impact driver bit because it has a hex end.

Is it secure?

Regular drills significantly create less torque than impact drivers, as we have already explained. The impact-driver bit can be safely used in common mixing drills. Another noteworthy aspect is how much safer it will be to use an impact driver bit with a conventional drill because it is made to withstand higher pressures.

However, using a standard bit on an impact driver will be challenging. Regular bits can be damaged when used with higher-torque impact drivers because of the substance and design of the bit.

Why are impact bits still prone to failure?

You might be curious as to why using an impact driver bit with a standard drill can cause it to break. Well, there are two possibilities.

Metal oxidation

As previously mentioned, the impact driver bit has greater ductility than a standard bit. When using a higher-torque impact driver, this characteristic enables the impact driver bit to be more flexible and withstand more pressure. However, this impact driver bit has a limit to its flexibility known as metal fatigue.

Metal becomes fatigued as a result of constant reshaping, and when it reaches an extreme degree, it fractures. The impact driver bit fits into this category as well. Fastening hundreds of screws with an impact driver bit continuously over time gradually wears down the tip of the bit until it no longer functions. Unfortunately, there is no tip that can stop metal fatigue, and using a drill bit will inevitably cause it.

Little slips

It results in the screw and drill bit pulling away from the fastener head during the fastening process. If it occurs frequently, the fastening task’s quality will suffer, which could harm the project as well.

Drill bit damage can also result from bit slides, albeit slowly. Therefore, whether it affects a driver’s bit or a standard bit, the bit will be harmed if the bit tip is not properly positioned on the fastener’s head. Therefore, it is advised to use the proper bit size for a particular fastener head and to exert sufficient power to prevent slippage.

Can I use impact bits in a standard drill? FAQs

Can a hammer drill bit be used with a standard drill?

No, the drill needs to be in hammer mode to operate. Without impact motion, it will just spin and not be able to drill through the concrete. Fortunately, the hammer drill has a drill mode that enables you to use it like a standard drill to penetrate various surfaces.

Can a standard drill be used with a concrete bit?

Regular drills and concrete bits can be used to drill into concrete. However, to complete the operation quickly and effectively, you need to use a hammer drill and reinforced drill bits.

Can the wood be drilled through with a masonry bit?

The masonry bit can be used to drill through the wood. But the process can take a while and leave a harsher hole. The cause is that using a masonry bit to drill through the wood will result in only drilling chips. Therefore, a tungsten carbide bit is advised to drill a better hole in wood.

Last words

Are you still wondering whether or not I can use impact driver bits in a conventional drill? Of sure, you can use this combo with assurance. You won’t have any trouble using the impact driver bit on your standard drill if your chuck accepts hex-headed bits.

The impact driver bit will actually be safer and enable you to exert more force when drilling through. However, keep those safety precautions in mind if you’re thinking of using a standard bit on an impact driver.